ANCEL BA301 Car Battery Tester For 6V Motorcycle Battery Tester 12V Car Analyzer 100 to 2000 CCA Battery Tester PK KW600
Brief Introduction of BA301
BA301 Battery Tester adopts the state-of-art conductance testing technology in the word to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery,healthy state of the battery itself, and common fault of the vehicle starting system and charging system, which can help maintence personnel to find the problem quickly and accurately. thus to achieve quick vehicle repair.
Reasons to choose Professional car battery tester ANCEL BA301
1. Support test wide range of 6V/12V batteries.
2. Simple and easy to use
3. Test batteries IN/ OUT of the vehicle
4. Accurate results in milliseconds
5. Battery life analysis, health percentage
6. Analysis Result: Good, Recharge or Replace
7. Lifetime update free and print via PC.
8. Add One-key entering battery voltage waveform analysis
9. 3 LED indicators directly tells you what happened to your battery
10. High quality imported STM-32 103VCT6 Chip Set, Faster running speed.
BA301 functions and features:
1.System voltage: 6-12 Volts
2.Test Result: Good, Recharge or Replace
3.Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Internal resistance value (mΩ)
5.Life in percentage (%)
8.Voltage test in waveform
9.Record and re-play battery data, Life-time free update service
10.Battery test, cranking test, charging test and other additional functions.
The cranking test is used to test and analyze the actual required cranking current and cranking voltage to check the starting motor works properly or not. The test result displays cranking time, voltage, and status. If the stating malfunction may cause an increased starting loaded torque; or rotor friction of the starting motor generates increasing friction of the starting motor itself.
Charging test is used to check and analyze the charging system (generator, rectifier, rectifier diode, etc.) status, displays load voltage, unloaded voltage, ripple status, charging system status, thus to find out whether the output voltage of the generator is normal, the rectifier diode works properly or not, which avoids damaging the battery and shortening its life greatly due to overcharging or incomplete charging.
Monitor Real-time Voltage
BA301 battery tester can monitors real-time voltage to check battery health status. There’s a hot-key to directly one-click read the voltage change graph. The waveform displays current voltage, maximum, and minimum voltage during ignition, and it will stay static until there are voltage changes detected. By analyzing the voltage of discharge, starting, and charging to know if the battery needs to be replaced or not.
ANCEL BA301 Car Battery Tester Supported Language:
Chinese, English, German, French, Japanese, Korean, Dutch, Russian, Spanish, Italian, Portuguese, Polish
Click Enter button before u plug cable with PC or laptop, then u see the screen enter into “update mode”, it means it come into update page successfully.
Print Function supported:
BA301 Compare with KW600: