PIC18F458 Chip+FTDI Chip
V1.59 V1.65 V1.70 V1.78 V1.99 is FT232RL Chip
V1.95 is FT232RQ Chip
OPCOM is a special PC Based diagnostic interface especially for OPEL.
Best Chip:PIC18F458 and FTDI FT232RL ,high speed and more stable function
Firmware v1.65 &V1.70&V1.95(optional) Software V2014 120309A
Language: English Only
Windows System: Win XP/WIN 7 32bits ONLY (close anti-virus program).No Work Win 8 or win10,computer not compatible.
Note: Please do not update online, or device will damaged broken.
If buyer received unreadbale CD or damaged,please ask me to send you download link .
1. It covers almost for all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since for Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
Full Fault Code Text Description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or for Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps
1 x OP COM Interface
1 x USB Cable
1 x CD
Note:If buyer received unreadbale CD or damaged,please ask me to send you download link .Do not open dispute or leave negative feedback .