Shipping from Russain OP COM V1.59 V1.95 with PIC18F458 Chip Diagnostic Tool OpCom V1.59 Can Bus Diagnostic Tool for Opel
Dear friend, Choose the Right Version you need, then we will send you the Right Version. thanks!
Dear friend, if the CD is broken on the road, please leave us your e-mail, we send the software to you; thanks for your support, have a nice shopping.
Opcom 2012V Can OBD2 For Opel Firmware PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip
Opcom OP-Com 2012V Can OBD2 for Opel Firmware V1.59 V1.70 V1.78
Note: Never Update It Online, It Will Damage The OP-COM ! There is no need to active the software, can be used directly
OPCOM 2012V Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2012V Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bo-sch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN – Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN – Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN – Single-wire, Low Speed CAN-BUS, 33.3 kbps
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD
OP-Com 2012V Software: